Departmental Report

Name of Department:  Production Engineering

Intake: 60

Starting Year: 1992 

Introduction of Department: 

Production Sandwich Engineering Course is accredited by National Board of Accreditation (NBA) (AICTE)

The course leading to a bachelor’s degree in Production Engineering (Sandwich) was started in the year 1994. The Department presently has highly qualified and experienced staff on its roll. The activities of the Department are conducted, besides teaching, in the areas of research, consulting, training, alumni and placement.

Department is planning to start the Post Graduate Course with Industrial Engineering as a specialization from academic year 2017-18.

  1. Areas research studies:
  • Advanced manufacturing
  • Computer integrated manufacturing
  • Production systems management
  1. Facilities

The Department has well equipped laboratories on the following subjects:

  • CAD/CAM Systems
  • Production Management
  • Robotics and Nontraditional Machining and Tool Engineering

The Department also has a departmental library, computer center and seminar hall.

 

RECENT ACTIVITY  

1. Dr Sandeep H Wankhade won 2nd Prize in Teacher’s: Engineering & Technology category. At State level competition Avishkar-2016, Maharashtra, India.
2. Dr Sandeep H Wankhade completed his PhD from S.R.T.M. University, Nanded in Mechanical/Production Engineering
 
3. Dr Sandeep H Wankhade completed International certification in  TRIZ Level – 2 by MATRIZ (International Association of TRIZ), Moscow, Russia.

 

 

Performance of this year:

  • Academic Result: May 2016
Sr. no. Class No. of Distinction No. Of First Class ATKT
1 SE 18 15 31
2 TE 23 23 28
3 BE 69 7

 

  • Topper’s List: May 2016
Sr. no Class Name Percentage
1 SE Bondar Vinay Sham 79.47
Thakar Sumit Satish 76.27
Radhika Lalsare 73.14
2 TE Kanade Siddesh C 82.08
Warghade Tejas R 81.28
Leenu Ganesh 73.84
3 BE Gaganpreet Singh 85.22
Korakana Sparsha 83.65
Choudhary Suresh 82.35

 

 Activities: (Activities carried in academic year 2016 are only to be mentioned)

  1. Research Grant

A Research project of Prof. S.H.Wankhade, titled “Optimization of Hybrid machining process of rotary electro discharge machining with abrasive media” sanctioning a grant of Rs.1 Lakhs 90 thousand  by   BCUD, Savitribai phule Pune University.

 

  1. Workshops arranged by Department for Faculty
  • Mr S H Wankhade organized a one day national level session on “FACE to Face Interactive session with Dr Sergei Ikovenko”. Sergie Ikovenko is a Professor at MIT, USA, TRIZ Level 5 Master and President of the International TRIZ Association (MATRIZ) on August 13, 2016, attended by 22 Industrial professionals at AISSMS College of Engineering, Pune.
  • Mr S H Wankhade organized the “Inauguration of AISSMS TRIZ Level – 1 Certification Training Programme” through Dr Sergie Ikovenko, a Professor at MIT, USA, TRIZ Level 5 Master and President of the International TRIZ Association (MATRIZ) on August 13, 2016 at AISSMS College of Engineering, Pune.
  • Mr S H Wankhade coordinated a one day session on “Interactive session on ‘Culture for Innovation’ By Dr. Hans-Juergen Lesser (CEO Centre of Expertise, ARaymond) and Mr Manish Padhariya (MD, ARaymond, Pune)”, on August 24, 2016 at AISSMS College of Engineering, Pune.
  • Mr S H Wankhade received a grant Rs 1.0 Lakh for organizing a 2 day State level seminar on ‘Zero Defect – Quality Improvement in Industries’ from Board of College and University Development, Savitribai Phule Pune University, Pune and was conducted on March 03-04, 2016 at AISSMSCOE, Pune.

3. Workshops / Seminars/ Guest lecturers arranged by Department for students

  • Mr S S Kallurkar has organized and conducted Entrepreneurship Awareness Camp on 24th-26th Dec 2015, sponsored by Department of Science and Technology
  • M.L.Chanpur arranged Guest lecturer on ‘Principle stresses and strains’ for SE Production S/W student
  • Mr S H Wankhade delivered a session on ‘Welding’ for Students of Steam Engineering Course conducted by Forbes Marshall on February 11, 2016 at Kasarwadi Plant, Pune.
  • Mr S H Wankhade delivered a session on ‘Systematic Innovation’ for Faculty and ‘Systematic Innovation and TRIZ: Theory of Inventive Problem Solving’ for Final Year Students of Aeronautical Engineering during on April 20-21, 2016 at Priyadarshini College of Engineering, Nagpur, Maharashtra.
  • Mr S H Wankhade started AISSMSCOE TRIZ Chapter at the college level in collaboration with TRIZ Association of Asia and International Association of TRIZ (MATRIZ), Russia. Under this chapter a TRIZ Level – 1 certification training Programme is planned. Under this lectures are being conducted on “Awareness of TRIZ” for all Third and Final Year Students of AISSMSCOE.
  • Mr V Y Sonawane arranged FIESTO (Robotic) Exhibition for students of AISSMS COE Pune

PRESS NOTE

 The very intention of organising the Seminar on ‘Mechatronics – An Industrial Application Approach’ is to bring together the well read academicians and well experienced Professionals through the grant of Rs 100000/- under Quality Improvement Program of Savitribai Phule Pune University and support of Management of All India Shri Shivaji Memorial Society’s College of Engineering, Pune. The chief Guest of the Inauguration program was Mr. Vidyadhar Tilak, Chairman, iETP Manufacturing Pvt Ltd, Pune. Mr. Suresh Pratap Shinde, Hon Joint Secretary, AISSM Society along with Dr D. S. Bormane, Principal, AISSMSCOE also graced the occasion. 63 participants from various Colleges and Industries attended the seminar during 3rd and 4th Mar 2017. Various sessions were conducted by Entrepreneurs, Industry Professionals and Academicians viz. Mr. Vidyadhar Tilak, Mr. Sachin Joshi (Founder, EkamEco Solutions, Mumbai), Mr. Gauresh Khanolkar (Chizel 3D Printing Solutions), Mr. Nilesh Bagul (Director, MIS Solutions), Mr. Basavaraj Hooli (Sr. Advisor, CDAC), Mr. Ajay Pradhan (Ex-Div Manager, Tata Motors), Mr. Zubair Shaikh (Forbes Marshall Ltd.), Mr. Nitin Gawhane (GM, Thyssenkrupp Industries India), Dr Shantipal Ohol (Asso. Prof., Mechanical Engg., COEP, Pune), Mr. Manish Padharia (MD, ARaymond Fasteners India Pvt. Ltd.) Mr. Rajan Shringarpure (Ex-MD, Vishay components India Pvt. Ltd.). These experts deliberated various topics related to Industrial Applications of Mechatronics, MEMS, Robots, Internet of Things, PLC, Automobiles etc. Special efforts were taken by HOD Mr. V. Y. Sonawane, Chief Co-ordinator Mr. S. H. Wankhade, Co-coordinator Ms. Y. K. Funde and all Faculty and Staff members of Production Engineering Department. Shri Shahu Chhatrapati Maharaj, President, AISSM Society and other honorable Trustees appreciated this conglomeration of Industry and Institute for knowledge sharing.

Press-Note-Pic-1-ConvertImage25042017

 

 

 

 

 

 

L to R: Prof V.Y. Sonawane, Mr. S. P. Shinde, Mr. V. M. Tilak, Dr. D.S. Bormane, Prof. S. H. Wankhade

 

 

Press Note Pic 222

 

 

 

 

 

Participants from various Industries and Educational Institutes listening to the Session in Seminar

 

 

 

 State level 2 Day Seminar ‘Zero Defect – Quality improvement in Industries’

Production Engineering Department has arranged State level Two Day Seminar on ‘Zero Defect – Quality improvement in Industries’ organized by SPPU, Pune 3rd – 4th Feb., 2016.

 

 

 

 

 

 

 

 

Achievements of this year (2016-17): –

  1. Faculty
  • Mr V Y Sonawane has attended QIP Short Term Course on Engineering Project Managemnt organized by Centre for Continuing Education at Indian Institute of Science Bengaluru on 14th to 18th November, 2016
  • Mr S H Wankhade attended a one week STTP on “World Class Manufacturing: A strategic Perspective” during June 13 – 17, 2016 at College of Engineering Pune (COEP), Pune.
  • Mr S H Wankhade delivered a session on ‘TRIZ’ at “World Class Manufacturing: A strategic Perspective” on June 17, 2016 at College of Engineering Pune (COEP), Pune.
  • Mr S H Wankhade delivered a half day session on ‘TRIZ Awareness’ for Managers on August 3, 2016 at Vishay Components India Pvt. Ltd. Loni, Pune.
  • Mr S H Wankhade delivered a Guest Lecture on ‘TRIZ Session on Project Selection and execution” for Final Year Students of Production Engineering on August 8, 2016 at SGGS Institute of Technology, Nanded, Maharashtra.
  • Mr S H Wankhade attended a one day “Orientation Lecture for AVISHKAR 2016” on September 28, 2016, organized by AISSMS College of Engineering, Pune in association with BCUD, Savitribai Phule Pune University, Pune.
  • Mr S H Wankhade attended an International conference “Innovex 2016” and Workshop on “Alternative System Design – Developing New Products out of Old Ones” and “Application of TRIZ in Industries” during November 23 – 27, 2016 at Hotel Chowne Plaza, Bangalore.
  • Mr S H Wankhade participated in Poster Presentation competition of Zonal Level – 1 Avishkar-2016 organized by Board of College and University Development, Savitribai Phule Pune University, Pune on December 2, 2016 at VIIT College of Engineering, Pune.
  • Mr S H Wankhade presented a paper titled “Performance parameter optimization of newly developed Hybrid process: Abrasive Assisted Electrical Discharge machining” in 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18, 2016 at College of Engineering, Pune.
  • Mr S H Wankhade presented a paper titled “Abrasive Assisted Electrical Discharge machining: An innovative hybrid approach” in International Conference on Materials, Manufacturing and Design Processing (iCMMD-2016), on December 21, 2016 at Babasaheb Ambedkar Technological University (BATU), Lonere, Maharashtra
  • Mr S H Wankhade participated in Poster Presentation competition of Zonal Level – 2 Avishkar-2016 organized by Board of College and University Development, Savitribai Phule Pune University, Pune on December 24, 2016 at PCCOE College of Engineering, Akurdi, Pune. The same is selected for next level of Presentation at Savitribai Phule Pune University level competition.
  • Mr S H Wankhade did the TRIZ Level – 1 certification from International Association of TRIZ (MATRIZ), Russia.
  • Mr S H Wankhade and Ms Y K Funde applied for grant for organizing a State level seminar on ‘Mechatronics – An Industrial Application Approach’ to Board of College and University Development, Savitribai Phule Pune University, Pune and an amount of Rs 1.0 Lakh is approved for the same and the Seminar is scheduled to be conducted on March 02-03, 2017.
  • Mr S H Wankhade, Mr V D Dholle and Mr S K Bidgar applied for a Research grant for “Optimization of Hybrid Machining Process of Rotary Electro Discharge Machining with Abrasive media” to Board of College and University Development, Savitribai Phule Pune University, Pune and an amount of Rs 1.9 Lakh is approved for the same.
  • Mr S H Wankhade delivered a half day session on ‘TRIZ Awareness’ for Managers on August 3, 2016 at Vishay Components India Pvt. Ltd. Loni, Pune.
  • Mr S S Kallurkar, Published and presented a paper entitled “Development Of A Model For Recognition Of Ergonomic Considerations Required For Structuring Of CAD Packages To Improve Usability And User Productivity” at National Conference on Technological Advancements and Automatization in Engineering on 28-29 Jan 2016. The paper is awarded a special consolation prize with a medal and certificate. Also the conference proceedings are published in International Journal for Scientific Research and Development (ISSN Online 23210613)
  • Mr S S Kallurkar has Completed Short Term Training Course on Entrepreneurship Competency Development Program, conducted by QIP Center, IIT Roorkee, from 13-17th June 2016
  • Mr Y R Chandwade & Mr S S Kallurkar arranged industrial visit for SE Mechanical student at ‘VANAZ ENGINEERING PVT.LTD, KOTHRUD, PUNE. on 3rd October 2016
  • Mr Y R Chandwade has arranged industrial visit for BE Production student at Science Park, Near Auto Cluster Research And Development Center, Pune Mumbai highway, Chinchwad
  • Mr Sandeep H Wankhade & Mr Sandip K Bidgar organised an Expert Lecture for Production Engineering students on ‘An overview of Material Science through Manufacturing Techniques’ By Mr Raghu Nair Head, Human Resources & Training, Forbes Marshall, Pune for Second Year Production Engineering students on 05 October 2016
  • Mr Sandip K Bidgar & Prof Sandeep H Wankhade organised an Industrial visit at Technofour Electronics Pvt. Ltd. Kasurdi, Pune for SE Production Engineering students on 30 September 2016
  1. Students

 Maintaining the tradition of rank from last 7 years in the All India Students Design Compitition organized by National Design & Research Forum of The Institution of Engineers. This year also our Students

 

 

 

 

 

 

Mr Ajinkya Sunil Kunjir (Gold Medal)

 

 

 

 

 

 

Mr Nilesh Ramesh Baravkar (Bronze Medal)

Mr Aditya Parisappa Gotadki (Silver Medal)

of B.E.(Prod/Sw) bagged prestigious Gold , Silver and Bronze medal respectively at “ 47th National Design and Research Forum” (NDRF), Bangalore.

  1. Department:

Department of Production Engineering conducted Department Advisory Committee meeting on April 2, 2016 at AISSMSCOE, Pune.

  • Department of Production Engineering has conducted Industry Institute Interaction with Forbes Marshall, Kasarwadi, Pune; FIAT, Ranjangaon, Pune; Tech Components, Ranjangaon, Pune; ARaymond, Chakan, Pune; Vishay Components Pvt Ltd, Loni, Pune.
  • Production Engineering Department has arranged State level Two Day Seminar on ‘Zero Defect – Quality improvement in Industries’ organized by SPPU, Pune 3rd – 4th Feb., 2016.
  • Department of Production Engineering has conducted Industry Institute Interaction with Forbes Marshall, Kasarwadi, Pune; FIAT, Ranjangaon, Pune; Tech Components, Ranjangaon, Pune; ARaymond, Chakan, Pune; Vishay Components Pvt Ltd, Loni, Pune.
  • Department of Production Engineering IEI Student’s chapter has organized expert lectures on Rapid Prototyping, Digital Manufacturing, Enterprise Resource Planning, Finite Element Analysis, Advances in CAD etc., Carbide Cutting tools, Soft Skills, Production Planning Software, IPR etc.
  • There is also production Engineering Students Association (PESA). The students related activities such as social programs, industrial visits, are carried out
  • As department is running sandwich pattern, in Third Year and Final Year, students are undergoing training in various companies like Thermax Ltd., TATA Motors, Hinoday, Godrej, Forbes Marshal, Kirloskar Oil Engines, TATA Auto Component, PARI etc. Therefore there is good interaction of staff guiding these students with various experts in such companies.

 AISSMS ET 2016

 A National Level Students Symposium ‘AISSMS Engineering Today-16’ was organized on 13th, 14th & 15th September 2016, under title PRODFEST-16. Students presented papers on Robotics in Manufacturing, Micro-electro-mechanical Systems and Case studies in Production Management and hosting events like Technical paper presentation, Marketing Mania, Technical Quiz, Autoledge, CAD WAR etc. Students from colleges across the country are participated.

ET2

 

ET

 

 

 

 

 

 

 

 

The Institution of Engineers (India)

Production Engineering Students’ Chapter Report

COLLEGE : AISSMS COE, PUNE-01
BRANCH :PRODUCTION SANDWICH
DATE : 28/08/2014
TIME : 10:00 am to 3:00 pm
NAME OF ACTIVITY : One Day Workshop On ‘Invention By Design’ To SE Production Sandwich Student.
VENUE : 237

workshop1
Mr V Y Sonawane offering bouquet to Mr Vinay R R SUMMARY:
One day workshop on “Invention by Design’ was organized by Production Engineering IE Student Chapter. This workshop was conducted by ‘Marathi Vidnyan Parishad’. The overarching objective of this initiative is to help and develop India’s Innovation Corps. Students learn about the process of innovation/invention, about idea generation and by cultivating “traits of inventive mind”.
The Institution of Engineers (India)
Production Engineering Students’ Chapter Report

COLLEGE : AISSMS COE, PUNE-01
BRANCH : PRODUCTION SANDWICH
DATE : 04/09/2014
TIME: 10:00 am to 3:00 pm
NAME OF ACTIVITY : One Day Workshop On ‘Invention By Design’ To BE Production Sandwich Student.
VENUE : Room No. 240
workshop
Mr V Y Sonawane offering bouquet to Mr Bhalachandra GondhalekarSUMMARY: One day workshop on “Invention by Design’ was organized by Production Engineering IE Student Chapter. This workshop was conducted by ‘Marathi Vidnyan Parishad’. The overarching objective of this initiative is to help and develop India’s Innovation Corps. Student’s learn about the process of innovation/invention, about idea generation and by cultivating “traits of inventive mind’.
Case Study Presentation to S.E. Prod S/W Student

DATE :  20/08/2014
TIME :   11.00AM TO 1.00 PM
VENUE :  ROOM No. 237

Mr. Viraj Kulkarni delivering Case Study to SE Production sandwich  student.
Case Study Presentation activity was arranged for the SE Production sandwich students. The BE Production sandwich students Viraj Kulkarni, Deven Lokhande, Ashutosh Lohar, Karan Bidgar &  Akshaykumar Patil present their case studies to SE Production sandwich students. They have also discuss the difficulties face during training.
One Day Workshop On ‘Invention By Design’ To SE Production Sandwich Student
DATE :  28/08/2013
TIME:  10:00 am to 3:00 pm
VENUE:  237
Mr V Y Sonawane offering bouquet to Mr Vinay R R
One day workshop on “Invention by Design’ was organized by Production Engineering IE Student Chapter. This workshop was conducted by ‘Marathi Vidnyan Parishad’. The overarching objective of this initiative is to help and develop India’s Innovation Corps. Students learn about the process of innovation/invention, about idea generation and by cultivating “traits of inventive mind’.
Six Sigma Certification Course
DATE : 21/08/2013 TO 23/08/2013
TIME : 10:00 am TO 5:00 pm
VENUE : Room No. 240
Lean Six Sigma Green Belt Certification Course of three day was organized by Production Engineering Students IE Chapter from 21st to 23rd August 2014.The student from BE Production Sandwich & BE Mechanical have participated. The knowledge of Six Sigma is important for Production Engineer, as it provides a common language and toolset that ensures the development and maintenance of the organization’s design, control and improvement in processes. With Six Sigma and lean Lean Six Sigma organization’s can increased revenue through improved customer satisfaction, waste elimination, reduced cost and decreased cycle times. The course was conducted in collaboration with Production Engineering Department, AISSMS COE and Asian Institute of Quality Management.
Engineering Today – 2014
Prodfest – 2014
DATE: 16th and 17th September 2014

EVENT: ProdFest – 2014

Summary:
Department participated in the Engineering Today – 2014 national event of college, as ProdFest -2014. Under this four events were organized namely Technical Paper Presentation, Marketing Mania, Technical Quiz and Autoledge. Total numbers of participant in the events were 100. Students had the good exposure to show their talent and had the interaction with the students of different colleges.

Events Details

Marketing Mania

Date of the Event: 17th September 2014.
Location of the Event: Room No. 240 (2nd Floor) Production Engg Dept, AISSMS, COE, Pune.
Host: Production Engineering Department

About the EventMarketing is the process of communicating the value of a product or service to customers, for the purpose of selling the product or service. It is a critical business function for attracting customers.
Advertising is a form of communication for marketing and used to encourage, persuade, or manipulate an audience (viewers, readers or listeners; sometimes a specific group) to continue or take some new action.
So this event is about marketing a product by appropriate advertising. Thus this event basically gets the marketing genius in everyone.

Autoledge

Date of the Event: 17th September 2014.
Location of the Event: Room No. 240 (2nd Floor) Production Engg Dept, AISSMS, COE, Pune.
Host: Production Engineering Department

About the EventAutomobile forms an indivisible part of our day to day life making our life much simpler with very complex mechanisms. An automobile is made up of several different parts some known and some unknown. Automobile as a system is an integration of various different systems working dependently or independently.
Defining Autoledge, it is a combination of ‘Auto’ from the automobile and ‘ledge’ from the knowledge. The event is about knowing your own vehicle to the core along with the functioning of various systems and thus the concepts, with the general knowledge of an automotive industry.
Event Snaps ProfFest 2014